Oatsbasf Protective Aluminum Metal Bumper Case For Xiaomi Black Shark 2

Oatsbasf Protective Aluminum Metal Bumper Case For Xiaomi Black Shark 2:

SHOCK-ABSORPTION PROTECTION

This Xiaomi Black Shark 2 bumper case is designed with 4 Detachable Air Cushion Silicon Pads in the 4 corners. The elastic silicon pads are higher than corners, provides nice drop resistance. Raised edges lift the camera and screen away from flat surfaces.

RAISED EDGES PROTECTION

This Xiaomi Black Shark 2 bumper case is designed with raised edges lift the camera and screen away from flat surfaces for better protection of your device.
Precise cutouts for all buttons and ports, convenient to use. No signal blocking.

NO SIGNAL BLOCKING

This Xiaomi Black Shark 2 bumper case is designed with precious cutouts in corners and bumpers for nice signal receiving. No signal blocking.

INSTALLATION INSTRUCTIONS

1. Put the case back up, then loosen four screws with a screwdriver and remove the 4 corners;
2. Put your phone back up and put the camera corner on the camera, then put the bumper part. Insert the tiny pillar into the hole of the camera corner. Then tighten the screw for 3 rounds, but not too tight;
3. Put the other 3 corners clockwise in the same way;
4. Check to make sure the bumper part is well inserted into the 4 corners;
5. Tighten the 4 screws to the utmost, so it will not loosen easily.